Spare Parts
Breathe Easy with Pure Water – Kent RO Spares & Service at Your Fingertips
POWP-RO MEMBRANE WELDED 8"
Kent Floater Ball Microswitch
SMPS 2.5A 24 DC WITH INCOMMING AND OUTGOING WIRES
DIAPHRAGM PUMP DP 150
INCLINE SEDIMENT FILTER-10
INCLINE Carbon FILTER-10
PREFILTER Sediment 10"
Installation
RO MEMBRANE
AQs for Kent RO Membrane 8''
Q: How often should I replace my RO membrane?
A: The lifespan of your RO membrane will depend on the quality of your water and how often you use your water purifier. In general, it is recommended to replace your membrane every 12 months.
Q: Can I use the Kent RO Membrane 8'' with my non-Kent water purifier?
A: Yes, the Kent RO Membrane 8'' is compatible with most other RO purifiers on the market. However, it is always best to check your purifier's manual to be sure.
Q: How do I install the Kent RO Membrane 8''?
A: Installing the Kent RO Membrane 8'' is a simple process that can be done in minutes without any special tools. You can find detailed instructions in the user manual that comes with the membrane.
Q: Where can I buy the Kent RO Membrane 8''?
A: You can purchase the Kent RO Membrane 8'' from Kent authorized dealers or online retailers.
Kent Floater Ball Microswitch
Q: Which Kent water purifier models are compatible with this microswitch?
A: The Kent Floater Ball Microswitch is compatible with the following Kent water purifier models: Pride, Super +, Perk, Grand, Maxx, Super Star, Wonder, and Ace+.
Q: How do I know if my microswitch needs to be replaced?
A: If your Kent water purifier is leaking or overflowing, it could be a sign that the microswitch is malfunctioning. You can also check the water level in the storage tank. If the tank is not filling properly, even after a long time, the microswitch might need to be replaced.
Q: How do I install the Kent Floater Ball Microswitch?
A: The installation process is relatively simple. You can find detailed instructions in the user manual for your specific water purifier model. Generally, you will need to disconnect the power supply, turn off the water supply, and then remove the old microswitch. Install the new microswitch and reconnect the water and power supply lines.
Q: Where can I buy a Kent Floater Ball Microswitch?
A: You can purchase the Kent Floater Ball Microswitch from Kent authorized dealers, online retailers, or local water purifier service centers.
Additional Tips:
It is recommended to replace the Kent Floater Ball Microswitch every 2-3 years to ensure optimal performance of your water purifier.
When purchasing a new microswitch, make sure it is compatible with your specific water purifier model.
If you are not comfortable replacing the microswitch yourself, you can consult a qualified water purifier technician.
SMPS 2.5A 24 DC WITH INCOMMING AND OUTGOING WIRES
Q: Will this power supply work with other water purifier models?
A: This power supply is specifically designed for the Kent Max water purifier. It may work with other models with similar voltage and current requirements, but we recommend checking the compatibility with your specific model before purchasing.
Q: How easy is it to install this power supply?
A: The Kent SMPS 2.5A 24V DC is designed for easy installation. Simply unplug your existing power supply, connect the incoming and outgoing wires according to the instructions, and plug it back in.
Q: Is this power supply safe to use?
A: Yes, the Kent SMPS 2.5A 24V DC is built with safety in mind and features multiple protection mechanisms to ensure safe operation.
Q: How long will this power supply last?
A: The Kent SMPS 2.5A 24V DC is built with high-quality components and is designed for a long lifespan.
Q: What is the warranty on this power supply?
A: The Kent SMPS 2.5A 24V DC comes with a [insert warranty period] warranty against manufacturing defects.
DIAPHRAGM PUMP DP 150
Q: What is the flow rate of the Kent DIAPHRAGM PUMP DP 150 ELITE II?
A: The flow rate is [insert actual flow rate value] liters per minute.
Q: What is the maximum head of the pump?
A: The maximum head is [insert actual head value] meters.
Q: Is the pump noisy?
A: The pump operates at a low noise level of [insert actual noise level value] decibels.
Q: Is the pump easy to install?
A: Yes, the pump is designed for easy installation and comes with [mention any included installation accessories].
Q: How long will the pump last?
A: The pump is constructed with high-quality materials and is built to last [mention expected lifespan or warranty period].
Q: Can I use the pump with other water applications besides RO systems?
A: Yes, the pump is suitable for a wide range of water pumping applications, such as [list examples like garden irrigation, fountains, etc.].
INCLINE SEDIMENT FILTER-10
Q: How often should I replace the Kent INCLINE SEDIMENT FILTER-10?
A: The recommended replacement frequency depends on your water quality. Generally, replace the filter every 3-6 months. Monitor your water flow and pressure, and if it decreases significantly, consider replacing the filter sooner.
Q: Can I use this filter in other brands of water purifiers?
A: This filter is specifically designed for Kent domestic RO, UV, and Alkaline water purifiers. While it may fit other brands with 10-inch inline housings, the compatibility and performance cannot be guaranteed.
Q: How does this filter differ from other sediment filters?
A: The Kent INCLINE SEDIMENT FILTER-10 features high-quality construction and advanced filtration media for superior performance and particle removal compared to cheaper alternatives.
Q: Where can I buy the Kent INCLINE SEDIMENT FILTER-10?
A: You can purchase the filter online through the official Kent website or authorized retailers.
INCLINE Carbon FILTER-10
Q: How often should I replace the Kent INCLINE carbon FILTER-10?
A: It is recommended to replace the filter every 3-6 months, depending on your water quality and usage. The Kent water purifier will usually have an indicator light or alert system to remind you when to change the filter.
Q: Is the Kent INCLINE carbon FILTER-10 compatible with all Kent water purifiers?
A: No, this filter is specifically designed for certain Kent domestic RO, UV, and alkaline models. Please check the compatibility list on the Kent website or consult your user manual to ensure it fits your purifier.
Q: Can I use a different brand of carbon filter in my Kent water purifier?
A: While technically possible, using a non-Kent filter may void your warranty and affect the performance of your purifier. Kent engineers their filters specifically for their systems, ensuring optimal filtration and compatibility.
Q: How can I dispose of the used Kent INCLINE carbon FILTER-10?
A: Wrap the used filter in a plastic bag and dispose of it with your regular household garbage. Do not crush or puncture the filter.
Q: Where can I buy the Kent INCLINE carbon FILTER-10?
A: The filter is available on the Kent website, authorized Kent retailers, and online marketplaces
other spare part and price
UF Membrane
Small: Rs. 650
Big (Pride/Super Plus): Rs. 1000
UV Barrel Assembly
Price: Rs. 900
UV Lamp
Wattage: 11W
Price: Rs. 500
Activated Post Carbon
Price: Rs. 450
Ballast/Choke
KG+: Rs. 1000
KG MRO: Rs. 525
Small: Rs. 525
Big: Rs. 1000
Bottom Tank
Model: Grand Plus
Price: Rs. 1750
Transparent Tanks
Pearl: Rs. 2335
Maxx: Rs. 1170
Kent Ultra Adaptor
Price: Rs. 1000
Inline Carbon Filter
Price: Rs. 550
Diaphragm Pump
100 GPD: Rs. 2650
150 GPD: Rs. 3100
Faucet/Pillar Cock
Price: Rs. 470
Float Valve
Price: Rs. 200
Float Sensor
Price: Rs. 300
Flow Restrictor Tube
Prices: Rs. 550, Rs. 300, Rs. 800, Rs. 250
Kent Gold Spares Set
Price: Rs. 700
Kent Regeneration Salt
Price: Rs. 600
Non-Return Valve
Price: Rs. 235/-
Pipe/Tubing
Size: 1/4"
Price: Rs. 35
Resin Cartridge Kent
Price: Rs. 750
RO Membrane
Price: Rs. 2950
Inline Sediment Filter
Price: Rs. 550
SMPS Adaptor
Price: Rs. 1000
Solenoid Valve
Price: Rs. 325
Tap
Price: Rs. 85
TDS Adjuster/NCV
Price: Rs. 260
10” Filter
Carbon: Rs. 550
Sediment: Rs. 260
20” Filter
Carbon: Rs. 800
Sediment: Rs. 800
High Pressure Switch
Price: Rs. 235
Low Pressure Switch
Price: Rs. 295
Filter Housing
10”: Rs. 800
20”: Rs. 1170
Elbow/Tee
Size: 1/4"
Price: Rs. 30
Size: 3/8"
Price: Rs. 50
Kent Ultra Switch
Price: Rs. 45